Becker Radio Code Calculator

Becker radio code for Free! Do you know what your Becker radio’s serial number is? Fill out the radio code request form to get a quick Becker to unlock code! All Becker Radios unlocked Instantly fill in your serial number, and email address, and use our Becker radio code generator to unlock your stereo for free.

What Is The Best Way To Get Your Becker Radio Code

It’s never been easier to get your car radio code!

The following Becker radios you may control by pressing buttons 1 and 6: Traffic Star, Grand Prix, Traffic Pro, Mexico, Europa, etc.

  1. Hold down buttons 1 and 6 together.
  2. The radio will display a sequence of information, the ONLY information being your serial number, which will begin with a number followed by 8 numbers.
  3. If nothing appears, proceed to the following step, which involves pressing and holding down buttons 2 and 6.
  4. So if you use this method, the radio will either display the serial number starting with a number and eight numbers or nothing at all.
  5. If nothing happens, move on to the next step (method 2).
Becker Radio Code Generator

Finding The Serial Number To Appear On The Screen

Keep the pre-set buttons 1 and 6 pressed down until the stereo cycles through different information. Various pieces of information are available, however, the serial number will simply start with a number and then eight digits. As shown in the sample image, your serial will start with a number.” 51138970 is an example.

How To Recover Your Becker Serial Number

For 2 to 5 seconds, hold down the preset buttons 1 and 6.
The radio will cycle through several information displays.
The serial number will start with a number as seen in the sample image if you use the last eight digits. 51138970 is an example.

How To Obtain The Serial Number For Your Becker Traffic

  • Keep the pre-set buttons 1 and 6 pressed down until the stereo cycles through different information.
  • Various pieces of information are here, however, the serial number will simply start with a number and then eight digits.
  • As shown in the sample image, your serial will start with a number. 51138970 is an example.
  • Obtaining your serial number from the label of your radio
  • The next step is to remove the unit! This ensures that the serial number for your Becker radio is available.
  • This is fairly easy to do, and 85% of radios only require the use of radio release keys to allow the radio to move forward.
  • When your radio does not have pre-drilled holes in each corner, simply remove the outer trim that surrounds the radio unit, and four screws will hold it in place.
  • The serial number will be printed on the label, beginning number, and followed by eight numbers.
  • If you’re unclear about the serial number, take a photo of any labels before reinstalling the device in the dash so you don’t have to remove it again.
Becker Radio Serial Number

Radio Codes For Becker Mexico And Europa

We rapidly decode both Becker Mexico and Becker Europa radio codes. Simply enter your Becker serial number and your radio decode will appear.
Mexico and Europa serial numbers are found on 95 percent of Becker radios, including those found in many vehicles.

What Is The Becker Radio Code And How Do You Enter It

When you see four horizontal lines on the display screen, enter the radio code. If you see the term wait, you should leave the radio on for up to an hour to allow the radio to reset.

So if Lock 10 appears on the screen, press and hold preset button 6 while turning the radio on to get three more chances to input the right code. If your radio shows Locked 13, the code will be useless since the radio must be manually decrypted.

  • For the initial digit of your code, continually press 1 on your keyboard.
  • To get the second digit of your code, press 2 again.
  • For the third digit of your code, press 3 repeatedly.
  • For the fourth digit of your code, press 4 repeatedly.
  • When your radio code appears on the display, press and hold the number 5 button until a confirmation beep sounds.

Frequently Asked Questions About The Becker Radio Code

My serial doesn’t start with a number. 85% of Becker radio serial numbers start a number. The stereo must be removed. It is possible the serial does not display when the pre-set buttons on the unit are held down. The serial number is always printed on the sticker label on the back of the radio. Check it once it is removed from the dash.

Taking Out The Becker radio

Although it may appear difficult, removing your radio is simple and takes little to no DIY expertise. For most models, you’ll require radio release keys. For others, you’ll need to remove the exterior trim and four screws that keep the radio in place.

Becker Radio Code
Becker Radio Isn’t Working

If the display reads “LOCKED 13,” the erroneous decoding has been entered too many times, and the system has become entirely locked. If this is the case, your only options are to visit a Becker dealership or to replace the unit with a new one.

What Is The Purpose Of A Radio Code

A radio code is intended to deter theft, and when the stereo’s power is turned off, its sensors indicate that it has been stolen or robbed. The majority of the time, this is due to a battery disconnect with mechanics or owing to routine maintenance.

One thought on “Becker Radio Code Calculator

  • bonjour mon nom est papa momar mbaye la radio de mon vehicule ML 270 CDI Annee 2000 me demande code apres retait de la batterie pour maintenance elle est de marque BECKER 4705 SERIAL NUMBER Y1060573. Aier moi a retrouver le code sil vous plait


Leave a Reply

Your email address will not be published. Required fields are marked *